***Can hand crank reels be converted to motor-driven reels?
Yes, JARCH has a number of conversion kits. The reel model and motor type will need to be verified. Listed below are some of the available conversion kits for Series 30000 reels. Contact customer service for more support.
A switch will also be required for all motor driven reels. JARCH has several types of switches and speed controls available. These switches are motor size specific and must be wired properly for the hose reel to function correctly. Have your hose reel model number ready and consult customer service for switch recommendations.
Hand Crank to Bevel Crank - Kit #S600765
CA33112 L to BA33112 L
Hand Crank to 12V Electric - Kit #S600768
CA33112 L to EA33112 L12D
Hand Crank to 24V Electric - Kit #S600771
CA33112 L to EA33112 L24D
Hand Crank to Hydraulic - Kit #S600780
CA33112 L to HA33112 L
Hand Crank to 4A Air Motor - Kit #S600767
CA33112 L to AA33112 L4A
Hand Crank to 6A Air Motor - Kit #S600770
CA33112 L to AA33112 L6A
Hand Crank to Explosion Proof Motors - Kit #S600781
CA33112 L to EA33112 L10AX
Hand Crank to Explosion Proof Motors - Kit #S600782
CA33112 L to EA33112 L12DX
Hand Crank to Explosion Proof Motors - Kit #S600783
CA33112 L to EA33112 L24DX
***Can I adjust the guide opening position on an enclosed model hose reel?
- Pull hose out of opening and latch into position.
- Remove (4) nyloc nuts on the cover.
- Pull enclosure off and rotate to desired position.
- Replace cover and tighten the (4) nyloc nuts.
- Pull hose out of opening and latch into position.
- Remove (4) nuts on base.
- Pull cover off and remove rubber inserts.
- Determine desired guide position and replace rubber inserts in slots not being used.
- Place cover on base studs in required position and tighten (4) nuts on base.
